Technical solution for irrigation pipes gasket

Abstract

The hydraulic plate seal made of aluminium pipes with nominal flow of 100 mm and operating pressure of 0.5 MPa. The crossing pipes with a length of 6.0 m are composing the installation of sprinkling watering with manual actuation and stationary watering IIAM type. The construction material is of rubber accessories, according to STAS 7277-83.The plate consists of an out lip, a lip inside a frontal area of an elastic sealing membrane that can be found in some rectangular equidistant channels. The technical solution represents the subject for an application submitted for getting a patent of invention no. 2006/00102. The plate has a high performance due to its simple and resistant structure, emptying with a higher speed, allowing a set over up to 7 degrees at each coupling on both sides of the alignment, for making curve trajectories.